PRODUCT FEATURES :
INPUT |
| Connectors |
: 1/4” Phone Jack, XLR &
Barrier Strip |
| Type |
: Active Balanced |
| Impedance |
: 20 K ohm |
| Max Input Level |
: +23dBu |
| OUTPUTS |
|
| Connectors |
: 1/4”TRS, male XLR (pin
2 hot) |
| Type |
: Servo - Balanced |
| Source Impedance |
: 200 ohm |
| Min. Load Impedance |
: 600 ohm |
| Max Output Level |
>+23dBu |
| Overall |
|
| Frequency Response |
: ±.23dB |
| Total Harmonic Distortion |
: <.01% @ + 20dBu |
| IM Distortion (SMPTE) |
: <.01% @ + 20dBu |
| Output Hum & Noise (unweighted)
|
: < -92dBu |
| Channel Separation |
: >95dB @ 1KHz |
| Gain Control |
: - to + 6dB |
| (EQ in, all faders flat,
20Hz-20KHz unless otherwise noted) |
| Filters |
| Type |
: Constant Q / Wein Bridge |
| Bandwidth |
: 1/3 octave |
| Tolerance |
: ± 3% |
| Range |
: ± 6 or ± 15dB |
| Subsonic Filter |
: 12dB / oct. 14 - 280Hz |
| Power Requirement |
| Nominal Voltage |
: 240 VAC, 50-60Hz |
| Minimal Voltage |
: 120 VAC |
| Power |
: 24W |
| Weight |
: 15 lbs |
| Dimensions (WxDxH) mm |
: 150X482X150 |
| Constant “Q”
design with low ripple and accurate response near the “Flat”
setting. |
| Precision Wein-bridge
Filters for accurate Response and low distortion. |
| Switchable high pass
filter. |
| High Quality Detented
metal-Shaft fader. |
| Frequency Sliders Feature
Center Detent “Off”. |
| Worldwide XLR, 1/4”,
and Euroblock Outputs. |
